We offer the client individually made to order specialist kitchen fume exhaust canopies / hoods manufactured from aluminium, stainless steel or powder coated zintec sheet steel.

Each canopy would be individually measured by our “in – house”design team and subsequently manufactured by our fully time served operatives. We always ensure close liaison with the client ensuring that they are fully aware of the system that are to receive prior to installation.

The canopies would each be provided with a range of additional products such as fan units, grease eliminator panels, damper controls and suitable extract grilles.

The canopies shall each be complete with a condensate channel and a suitable drainage point where applicable.

The canopies shall each connect to a range of suitable ductwork that would terminate either on the roof or through an external outside wall.

Canopy Maintenance / Ductwork Cleaning

It is imperative that all kitchen canopies, grease filters, ductwork and fan units are cleaned and serviced on a regular basis to prevent both breakdowns with the system and also to prevent a grease build – up causing a potential fire hazard.

We offer our client a service involving the regular maintenance and cleaning of each of the following products:-

Grease Filter Panels

The periodic cleaning of the filter panels is absolutely essential. A clogged grease filter can disrupt the entire ventilation system and also prevent a serious and unnecessary fire hazard.

We offer spare filter panels as they are a cost effective way of avoiding “down time”whilst the original panels are being cleaned. This then enables cleaning of the filters to be carried out at a convenient time in the kitchen schedule.

Fan Unit

We would clean the exterior of the fan unit and visual inspect the condition of the mounting feet and fixing devices supporting the fan. The fan impellor would be checked to see that it rotates freely and it would be cleaned as necessary.